Hunter 4000L light kit is a combination of low-beam light pods, wire harness and smart M controller(gather a dimmer and a flash button). The high power LEDs covered by the special low-beam lens can fully meet your low-beam lighting needs with an obvious light tangent.Then with DRL, this kit is definitely a unique set on the market. Equipped multi-size mounting bracket suits a wider range of fairings. The full piece low beam optic still can reach over 210m at one lux.

Only need three steps,connect the wiring positive/negative lead to the bike battery, and mount the dimmer at the mirror bar end, then stick the flash button anywhere nearby. You will start an interesting and safe riding trip with Hunter lights. The Generation Ⅱ controller will automatically detect the bike's battery status and provide low voltage protection.The memory function records your lighting set of last riding to save your preparation time before riding.

Everything gets ready. Long press the dimmer to turn on the control system, then click and rotate the dimmer to adjust the color temperature / brightness of the Hunter 4000L, from 0% to 100% / from 3000K to 6500K, or press the flash button to achieve 100% brightness in seconds, long press over 0.8 seconds can achieve 100% continuous flashing, long press over 2 seconds to flash 3 times alternately left and right at full brightness. Under the intelligent mode with the smart light sensor, only DRL allowed to be turned on during the day; but there is no doubt, the lights will turn on automatically when riders cross the dark tunnels. It's really awesome, right?

If you prefer to let the Hunter lights work with bike's original high beam/horn/turn signal buttons, it means Hunter lights achieve 100% brightness when you turn on your high beam and flash to full when you sound your horn, flash at the same frequency with your turn signal lights. We have the 5-pins(ACC/High beam/Horn/Left turn/Right turn) input cable as accessory for selection.